数值模拟在建筑结构教学中的应用

建筑结构是建筑学专业学生的必修课程,教学大纲涵盖大量概念性知识和方法性知识。为了帮助学生在课堂上尽快进入课题情境,本文借助ANSYS结构有限元分析软件,将数值模拟引入建筑结构课程教学中,让学生直观看到构件和结构的受力特点和破坏形态,有助于启发学生的主动思维、提高课堂教学质量,实现＂学习迁移＂在教学中的正效应。     

Surface latent heat flux anomalies quasi-synchronous with ionospheric disturbances before the 2007 Pu’er earthquake in China

One of various mechanisms of pre-earthquake lithosphere–atmosphere–ionosphere coupling as possible explanation of the seismo-ionospheric effects is connected with the release of latent heat. Abnormal variations of ionospheric electromagnetic parameters possibly related to the 2007 Ms 6.4 Pu’er earthquake in China were reported. This paper attempts to examine whether there were abnormal changes of surface latent heat flux (SLHF) linked with this pre-earthquake ionospheric disturbances. The spatio-temporal statistical analyzes of multi-years SLHF data from USA NCEP/NCAR Reanalysis Project reveal that local SLHF enhancements appeared 11, 10 and 7 days before the Pu’er earthquake, respectively. As contrasted to the formerly reported local ionospheric Ne enhancement 9 days before the shock observed by DEMETER satellite, it is discovered that the SLHF and Ne anomalies are quasi-synchronous and have good spatial correspondence with the epicentre and the local active faults. This is valuable for understanding the seismogenic coupling processes and for recognizing earthquake anomaly with multiple parameters from integrated Earth observation system.     

基于MTPA的内置式永磁同步电机转矩预测控制

针对采用矢量控制方法的内置式永磁同步电机(IPMSM)存在解耦复杂、附加优化目标难以融入系统控制等问题,提出了一种基于最大转矩电流比(MTPA)的IPMSM转矩预测控制方法。在推导MTPA控制原理的基础上,分析了转矩预测的控制机理及性能指标函数。22 kW试验样机的仿真与试验结果表明,系统稳态及全局加减负载条件下调速性能良好、转矩动态响应迅速。该方法在重载条件下定子电流利用率显著提高,满足电动车辆驱动控制系统的性能和效率指标要求。     

Vibration controlled convection — preparation and perspective of the Maxus 4 experiment

A comparatively new possibility to influence convection in crystal growth melts is the application of controlled interface vibration, especially in systems with free melt surfaces like the float-zone process. The present paper concerns the development and testing of a vibrational device which will be integrated into a microgravity crystal growth facility for the growth of silicon crystals. In the case of silicon grown by the float-zone technique, time-dependent thermocapillary convection is present even under mirogravity and leads to unfavourable variations of the crystal composition profile.The developed setup can operate in the range of approximately 0.1 to 50kHz producing maximum amplitudes of 0.25μm (non resonance case) and 3.5μm (resonance case) respectively. The power consumption is below 5W, the maximum operation temperature of the device is restricted to 200°C, limited by an epoxy-based connection between vibrator and sample. The first microgravity application will be during the European Maxus 4 campaign in April 2001.     

A fast satellite selection algorithm with floating high cut-off elevation angle based on ADOP for instantaneous multi-GNSS single-frequency relative positioning

With the Global Navigation Satellite System (GNSS) developing, the single-frequency single-epoch multiple GNSSs (multi-GNSS) relative positioning has become feasible. Since a larger number of the observed satellites make the instantaneous (single-epoch) positioning time-consuming, a proper satellite selection is necessary. Among the present methods, the satellite selection with a fixed high cut-off elevation angle (CEA) is least time-consuming. However, there is no criterion how large a fixed high CEA should be to achieve a high success rate and less time consumption. Besides, a fixed high CEA makes the number of visible satellites largely variable, which affects the success rate. Hence, a satellite selection strategy based on ambiguity dilution of precision (ADOP) is proposed. Firstly, the theoretical proof that the ADOP increases the least when removing satellites are all low-elevation-angle satellites is given, which is important to achieve the fast positioning with a high success rate. Then, the threshold $\beta$ is calculated for a different number of satellites and a given ADOP. The satellites are selected based on their elevation angles from high to low until $\beta$ of the selected satellites becomes smaller than the corresponding threshold; this method is called the extended floating CEA multi-GNSS (EF-multi-GNSS). The comparison of the single-frequency single-epoch positioning performance of the EF-multi-GNSS with the satellite selections based on a fixed low CEA (L-multi-GNSS) and a fixed high CEA (H-multi-GNSS) via the relative positioning experiments shows that: (1) the EF-multi-GNSS with a minimal number of satellites can achieve the fast positioning and a high success rate close to 100%. It can greatly reduce the time consumption of the L-multi-GNSS, by about 64.0%, by selecting 12.6 satellites of 23.4 satellites; (2) the floating CEA of EF-multi-GNSS eliminates the consideration how large a fixed high CEA should be, and a CEA larger than the fixed high CEA of the H-multi-GNSS makes it more suitable for different conditions.     

鸭翼电磁散射特性分析与RCS减缩方法研究

利用多层快速多极子方法计算鸭翼模型雷达散射截面(RCS),分析了鸭翼前缘后掠角和展长对鸭翼RCS值的影响,并根据计算结果拟合了随前缘后掠角和展长变化的鸭翼RCS曲线。建立飞机模型,计算了鸭翼不同偏转角时飞机的RCS值,研究鸭翼偏转对飞机头向RCS的影响。计算结果表明,鸭翼偏转会显著增大飞机头向RCS,影响飞机隐身性能。根据计算结果分析推导出鸭翼纵向操纵力矩、飞机头向RCS和鸭翼几何参数之间的函数关系,为鸭翼的隐身和气动优化设计提供了技术基础。对鸭翼上使用吸波材料的情况进行计算,结果验证了在鸭翼上涂敷吸波材料能够大幅降低飞机头向RCS。     

双圆弧齿轮接触迹间载荷分配状况分析

基于圆弧齿轮的啮合传动原理,提出了研究双圆弧齿轮传动的各接触迹间载荷分配状况的动态分析计算方法并编制了相应的计算程序。实际分析计算了各主要影响因素对双圆弧齿轮接触迹间载荷分配状况的影响情况。      

Ultraluminous infrared galaxies: Starburst vs. AGN

We have obtained ISOPHOT-S low resolution mid-infrared spectra of a sample of 60 Ultraluminous Infrared Galaxies (ULIRGs). We use the strength of the ‘PAH’ mid-infrared features as a discriminator between starburst and AGN activity, and to probe for evolutionary effects. Observed ratios of PAH features in ULIRGs differ slightly from those in lower luminosity starbursts. We suggest that such PAH ratio changes relate to the conditions in the interstellar medium in these galaxies, and in particular to extinction.     

Inter-satellite link augmented BeiDou-3 orbit determination for precise point positioning

Precise Point Positioning(PPP) requires precise products, including high-accuracy satellite orbit and clock parameters. It is impossible to obtain an orbit solution that is sufficiently accurate for PPP services with a regional tracking network; therefore, satellite orbits are usually estimated by a global tracking network with a large number of ground stations. However, it is expensive to build globally distributed stations. Fortunately, BeiDou-3 satellites carry an InterSatellite Link(ISL) pay...     

城市建筑室内外无缝应急救援定位技术

应急救援定位技术的发展关系到救援人员和受害人员的生命安全。首先，对应急定位与普适定位进行了对比，总结了应急定位的主要特征，阐述了应急定位系统的精度、连续性等技术指标。之后，分析了不同传感器在应急场景下的可用性，对相应传感器在应急定位领域中的融合和应用进行了综述。最后，围绕坐标基准、知识图谱、多源协同、智能控制四项关键技术架构室内外无缝应急救援定位系统，总结了构建流程。其中，坐标基准将室内和室外、相对定位和绝对定位统一，而知识图谱综合权威发布信息和灾害场景信息进行决策，不仅可以辅助多源融合中传感器的选择、传感器无缝切换以及故障传感器隔离，还能协调智能控制中救援设备的调度、救援设备之间和救援设备与人员之间的协同定位。